POD13 Templates

The Prophecy Cards

Each Card Template file is named in sequence 1F, 1B, 2F, 2B meaning 1 Front, 1 Back, etc. The Manual is marked the same way 1PF, 1PB, meaning 1 Page Front… 1 Page Back.

The Cards were Printed using MS Paint, Landscape, and fit to page settings. The Manual was printed by right clicking file in File Manager, select Print, set to Landscape, and fit page.

Note : Every printer is not the same, and adjustments may need to be applied. Lets Hope Not. Check to see if any adjustment need to be made, hold page up to the light to check if the Back, and Front of page match up.

If adjustments are necessary, Load the Back template of the Card or Manual Page in MS Paint, choose the Select tool in the Top Tool Bar, then Right Click on picture and choose Select All. Move selected area left, or right as needed to adjust for center, then reprint. The Canvass Measurement is at 1.85×1.38 inch, located at the Bottom of MS Paint, make sure this stays the same or centering the Front and Back becomes very complicated,

Hold printed Card or Manual Page back up to the light to see if both sides line up, it may take a couple of tries.

When the Manual is Printed Just put the pages in sequence, staple, or glue the pages down the center, fold the book, cut off excess paper. After Printing Cards, laminate if desired, then cut out Cards… Simple, Ready To Go.

File Download is a Zip file containing the Manual and Cards Templates.